YiMu’s service areas
China Shanghai| Beijing | Guangzhou | Xiamen | Shenzhen | Hongkong | Macao, Germany | France |The Netherlands | UK | Spain | Italy | Russia| Brazil | Mexico | South Africa | USA(American) | United Arab Emirates |South Africa | Singapore | Thailand | Malaysia | Japan |Korea| Australia | Indonesia | Philippines ,etc.
Points in the design and construction of overseas exhibition stands
Now different cities will often encounter different exhibitions,at this time we need to carry out booth design and construction,but due to various fields and brand enterprises launched product types,size and appearance of a large difference, in the booth design and construction process need to pay attention to more details.
First, time management is the first priority. Within the time range allowed by relevant organizers, enterprises or relevant construction teams should arrange their stands as far in advance as possible, and install and place the products.
Second, because of different enterprises in the booth design and construction’s cost are not same, so we must do the relevant budget in advance,such as personnel budget, logistics budget, booth material budget and so on, reasonable booth budget plan design, can make its expected effect to achieve the best state.
Third, environmental problem is also a key point,in 21st century, all walks of life are advocating environmental protection and energy saving, low carbon life, green, projects in booth design and building may produce a lot of garbage, this time must take positive and effective treatment methods, minimizing waste when the demolition of booth and to reduce the risk of its pollution.
Fourth, choose environmentally friendly materials as much as possible, so that even after demolition, such materials can be recycled in the future.
Fifth, booth design and build should avoid form relatively drab, now the booth material most are the same, in order to guarantee the booth to have a richer visual effects, this time will need to be more on the design ideas, unique booth to attract more consumers, the eye of this visitor, help enterprises to achieve the best effect of propaganda.
Sixth, the safety management needs to be put in the first place to consider, to know the different booth in addition to pay attention to practicality and beauty, safety is also very important. Because there may be a lot of people in the exhibition process, if the booth is not safe enough, it may lead to casualties of different degrees. In the booth construction, we must pay attention to the selection of materials and the measures to secure.
Our services: booth application, booth design and construction, exhibits transportation, guidance and visa booking, on-site advertising, foreign reception, post-exhibition visit, venue and process arrangement, exhibition subsidy assistance application, etc.
What is the process of booth construction?
At the beginning of each exhibition, the booth construction process must be carried out in an orderly manner, or it will delay the time and leave a very unprofessional impression on the customers. Is below small make up to sort out some knowledge about the booth process, to learn about together.
Introduction to booth construction process:
- After entering the exhibition hall and finding the booth, lay the floor such as carpet platform.
- When the ground is laid, assemble and install the main structure of the exhibition frame, generally starting from the back plate.
- After the main structure is installed, various exhibition tools are installed.
- After the main construction is completed, wiring can be carried out and lighting equipment can be installed.
- After the main body and exhibition tools are completed, art and painting can be installed.
- After the installation of the general structure and exhibition tools, the client will start to arrange the exhibits. Generally speaking, the exhibits will be placed in the order of “first up and then down”, “first up and then down”, “first up and then down”, “first inside and then outside”, to avoid illegal operation and finally useless.
- After arranging exhibits, timely check and adjust them to the best condition.
- Finally, do the cleaning work, clean the site, seal the exhibition area with tape before leaving, and take photos for file. Prepare for the next day.
- During the exhibition, there will be staff on duty at the booth every day before the exhibition opens to deliver electricity and do cleaning work. The doors are closed.
What are the problems in Booth construction?
Many merchants now temporary activities need booth design structures, to do business, and the problems in the booth design structures, is worthy of our consideration, because don’t care about these questions later booth will may bring great trouble to the merchant, thus affecting business very poor impression of event planning party.
Its booth design and construction should pay attention to the following issues:
First, environmental protection
As we all know, waste is bound to be generated in places with large number of people. Although the exhibition time is short, the space is also very limited, so the disposal of exhibition waste and waste has become a very important part of the exhibition environment management. And most of the waste in the exhibition is generated when the booth is built and dismantled. In order to reduce the production of waste and garbage during the demolition, the booth builders need to make a good plan in advance, conduct strict management during the booth construction, and recycle the booth construction materials as much as possible.
Second, uniqueness
The booth design should avoid single form, although the material is the same, but can ensure that the booth in different exhibitions are different. This requires the builder to have rich experience in booth design, as well as imagination. Only in this way can we build a new and unique booth.
Third, security issues
While the booth design is unique and beautiful, safety must be the first priority. Now exhibitors want their booths to have a different and unexpected effect, which makes the modern exhibition stands and even the exhibition itself enter an era of high standards. Whether it is a two-story exhibition stand or a display wall with a very large span, the strength of its connections and the balance of forces must provide a high standard of safety. And the system components in solving the structural balance and firmness of the booth, can help booth builders save a lot of trouble.